Showing 409–432 of 699 resultsSorted by latest
Generic P-channel MOSFET transistor in TO-220 package. Generic implies that the exact part number may vary, but the transistor will always be equal to or better than the parameters below.
• Id: -23A
• Vgs(th): -2.0V
• Vdds: -100V
• Rds(on): 0.117ohm
• Package: TO-220
• Component example: IRF9540N
WiFi antenna with standard SMA male connector for connecting to your PCBs.
• Connector: SMA male
• Impedance: 50 ohm
• Frequency: 2.4GHz
• Dimensions: 50.5 x 19 x 10mm
GSM PCB antenna with IPX connector for connection on your boards that use an IPX connector.
This antenna connects you to 4G/LTE network it connects on your device via an IPX connector.
• Frequency: 4GHz/LTE
• Dimensions: 40 x 15 x 0.25mm
• Cable lenght: 12cm
This product has IPX connectors on both ends they are gold color and its lenght is. Connects easily and has good connection.
• lenght: 10cm
IPX SMD connector for soldering to the printed circuit board. It is most commonly used with antennas, and the impedance is 50 ohms.
If you have a device you want to connect to a WiFi network, by using an IPX connector, all you need is this antenna. Use the IPX connector to establish connection with your device and it is ready to connect to a 2.4GHz WiFi network.
SPST (single-pole, single-throw) is a simple switch that connects or disconnects the two contacts in its casing.
• Type: SPST
• Shape: box
• Max. current/voltage: 250VAC 10A
• Dimensions: 17mm x 13mm x 11mm (without contacts)
This water pump is extremely easy to use. Soak it in the water or liquid that you want to pump, add a tube to the drain and connect it to the power supply. You can also immerse the pump in the liquid you want to decant. In that case you don’t need to attach a inlet tube in this case. It operates at 12V and is able to expel 240L of fluid per hour.
• Voltage: 12V
• Max. height fluid can reach: 300cm
• Flow rate: 240L/h
• External diameter of drainage tube: 8mm
• Pump dimensions: 55 x 52 x 41 mm
Generic P-channel MOSFET transistor in DPAK package. Generic implies that the exact part number may vary, but the transistor will always be equal to or better than the parameters below.
• Vdss: -30V
• Vgs: -2.1V
• Rds(on): 0.068ohm
• Id: -30A
• Package: DPAK
• Components example: HY19P03
M4 rectifying diode inside SMAF package. Often used to adjust voltage and protect against reversed polarity.
SPDT (single-pole, dual-throw) is simple switch which connects central contact with one of the other two contacts located inside its housing.
A new and more powerful Raspberry Pi 4 is here! The most famous little computer in the world that doesn’t need any introduction. The 87 x 58mm board features a 64-bit 4-core processor clocked at 1.5GHz, 4GB of RAM, WiFi and Bluetooth, Gigabit Ethernet, 2x HDMI output, 4 USB ports, an SD card slot for system sotrage and your data. One should not forget the well-known Raspberry Pi GPIO, which allows you to connect various accessories directly to the Raspberry Pi.