Shop

LCD screen with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 16 symbols in two lines and therefore can be used in many projects that need to send clearly visible and legible output information.

• The color of symbols: orange
• Backlight: black
• Dimensions: 80 x 36 x 12 mm
• Screen dimensions: 64.5 x 16 mm
• Voltage: 5V
• Comes with 16-pin flat, non-soldered male header.

LCD screen with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 16 symbols in two lines and therefore can be used in many projects that need to send clearly visible and legible output information.

• The color of symbols: yellow
• Backlight: black
• Dimensions: 80 x 36 x 12 mm
• Screen dimensions: 64.5 x 16 mm
• Voltage: 5V
• Comes with 16-pin flat, non-soldered male header.

LCD screen with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 16 symbols in two lines and therefore can be used in many projects that need to send clearly visible and legible output information.

• The color of symbols: red
• Backlight: black
• Dimensions: 80 x 36 x 12 mm
• Screen dimensions: 64.5 x 16 mm
• Voltage: 5V
• Comes with 16-pin flat, non-soldered male header.

LCD screen with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 16 symbols in two lines and therefore can be used in many projects that need to send clearly visible and legible output information.

• The color of symbols: white
• Backlight: black
• Dimensions: 80 x 36 x 12 mm
• Screen dimensions: 64.5 x 16 mm
• Voltage: 5V
• Comes with 16-pin flat, non-soldered male header.

Load cell is a small device that is able to weigh the load on it. Due to the load, it provides very small output voltages that need to be amplified (eg using op-amp or ADC with a built-in op-amp) to find the use for the module. It incorporates two invariable two variable resistors connected to the Wheatstone Bridge. This sensor is made from high-quality materials, so it does not get affected by high temperature or continous load. You need to connect it with the HX711 to read information with Croduino.

The HX711 is a highly versatile load cell amplifier that is widely used in various applications requiring precise weight measurements. This version of the breakout connects to a microcontroller’s GPIO via breadboard-compatible header pins. It is designed to convert analog signals into digital values and have them easily available over GPIO and the provided software Libraries (Arduino and MicroPython), making it ideal for integration with home engineering projects.

This load cell amplifier employs a 24-bit analog-to-digital converter (ADC) to ensure high-resolution and accurate readings. It supports differential input signals and offers two differential input channels, allowing the connection of up to two load cells simultaneously. This feature enables the measurement of both single- and multi-load cell systems, expanding its application range.

The HX711 incorporates an integrated voltage regulator, which provides a stable supply voltage for the load cells and ensures accurate and reliable measurements. It is ideal for diverse applications, from kitchen scales and pet feeders to robotics and industrial automation. We provide documentation and technical support, ensuring you have all the resources needed for implementation.

Load cell is a small device that is able to weigh the load on it. Due to the load, it provides very small output voltages that need to be amplified (eg using op-amp or ADC with a built-in op-amp) to find the use for the module. It incorporates two invariable two variable resistors connected to the Wheatstone Bridge. This sensor is made from high-quality materials, so it does not get affected by high temperature or continous load. You need to connect it with the HX711 to read information with Croduino.

Small, industrial power supply inside the iron enclosure enables 230V AC conversion into a 5V DC with 6A maximum current (30W).

Once you learn how to solder, you notice that your soldering isn’t perfect. Desoldering pump is a tool that should be on the table of each maker/electronics engineer because it allows easy removal of excess solder, thus repairing short circuits or removing the components from the board. It works on the principle of “sucking in” the solder (liquid state) inside itself. It is completely safe to use.

The active GPS antenna is the perfect solution for enhancing the GPS signal reception of your device. It features a 3-meter long cable with a standard SMA male connector, providing you with ample length for flexible installation. The antenna’s magnetic base allows for easy and secure mounting on any metal surface, making it ideal for a wide range of applications.

This high-performance antenna operates on a frequency of 1575.42MHz and offers a 28dB of amplification, ensuring a strong and stable GPS signal. With a voltage range of 3V-5V and a low current consumption of 10mA max, it is both efficient and versatile. Its circular (RH) polarization further enhances signal quality, providing you with reliable and accurate positioning data for your projects.

Whether you are building a vehicle tracking system, a drone, or any other project that requires precise GPS data, this active antenna is an excellent choice. Its compatibility with popular platforms like Arduino and Raspberry Pi makes it a go-to component for makers and hobbyists. The compact dimensions of 45mm x 39mm x 13mm allow for seamless integration into your setup.

• Connector: SMA male
• Frequency: 1575.42MHz
• Voltage: 3V-5V
• Current: 10mA max.
• Polarization: circular(RH)
• Amplification: 28dB
• Dimensions: 45mm x 39mm x 13mm

Infra-red (IR) diode emits light in the spectrum that the human eye can’t see. However, such a diode has its purpose. It is used in remote controllers that send information on wavelengths within the infrared spectrum, e.g. to change television programme. So all you need to create your own remote is one of these diodes and correct data which will be sent!

Improve your DIY and automation projects with our 5V Mini Water Pump. Engineered for integration with Arduino and other microcontrollers, this compact pump is the ideal solution for hobbyists, educators, and makers. It’s small footprint and efficient operation make it perfect for a wide array of applications where precise fluid transfer is essential, from educational robotics to model designs.

Designed with your creative options in mind, this mini water pump excels in various scenarios. Easily create automated plant watering systems to keep your indoor garden alive, or develop innovative liquid dispensing mechanisms for your custom projects. Its robust design ensures reliable performance, making it a component for any project requiring controlled water movement.

Experience ease of use and broad compatibility; this 5V Mini Water Pump offers straightforward setup, allowing you to quickly incorporate it into your circuits without complex configurations. Its low power consumption and durable construction guarantee long-term functionality, providing a cost-effective and dependable solution for all your fluid dynamics needs. Elevate your projects with a pump that combines efficiency, adaptability, and the power to bring your ideas to life.

• Voltage: 3V – 6V
• Max. liquid ejecting height: 40-110cm
• Flow speed: 120L/h
• Exterior diameter of drain tube: 7.5mm
• Interior diameter of drain tube: 4.7mm
• Pump dimensions: 24mm(diameter), 33mm(height)

easyC is a system developed by Soldered to establish easy connections between different I2C devices: microcontrollers, sensors, actuators. Connecting is easy and fast with pre-assembled cables. This connector is located on every easyC-compatible product.

SPDT (single-pole, dual-throw) is a simple sliding switch that connects the central contact with one of the other two contacts in its housing.

The IR receiver is a device that detects the modulated IR radiation emitted by the remote controls. The IRM-56384 detects IR radiation on a standard frequency of 38kHz and outputs signal to its output pin, which can be read with a microcontroller. Thus, it enables project management via the remote control.

RFID card is white and the size of standard credit card. We promise that it will fit into any standard wallet! Comes with random unique code.

RFID card comes in two variants, 125kHz or 13.56MHz.

GSM SMA Connector antenna with standard SMA male connector for connecting to your GSM PCBs.

• Amplification: 3dBi
• Frequency range: 900 – 1800 MHz
• Length: 50mm
• Vertical polarization