Shop

To pick up ultra-small components and put them in the right place you simply have to own a right tool. One such are the tweezers for SMD components which will enable you to handle 0603 components. With little more exercise even smaller ones, won’t be an issue. Of course, the tweezers are ESD safe so you shouldn’t worry that something will happen to your components.

The SMD components are very small and the tweezers help us to do the job properly. And what should we do when we are having larger components, such as integrated circuits that can be so large that we can not grab them with tweezers? SMD vacuum tweezer will help us here. It uses a vacuum to grab the surface of IC. The vacuum is activated by pressing a small button, so using this tool won’t be a problem. It comes with several tips for different integrated circuits.

This interesting product enables you to control who has is allowed to turn on or turn off a circuit. Namely, in order to change the status of this switch, you need to put the key in the lock and turn it around.

The water level sensor allows you to detect the height of water or some other liquid in the tank. This float sensor works on the principle of magnets and magnetic (reed) switches. Usually, it is mounted on the bottom or top of the tank, and when in water, the floating part with a magnet, triggers the magnetic switch. This alteration can be detected and trigger a certain action; eg filling the tank or launch alert.

The Shunt Resistor is a special type of resistor with small resistance which allows large currents to pass through it. This is useful for measuring the current in a circuit: due to the Ohm’s law and voltage drop on the shunt resistor, we can know exactly which current passes through it. For example, for this resistor whose maximum current is 50A, the voltage drop at that current will be exactly 75mV (0.075V). Using a precise ADC, we can accurately measure the current of our consumer or power source.

• Max. current: 50A
• Voltage drop for max. current: 75mV
• Dimensions: 120mm x 25mm

The Shunt Resistor is a special type of resistor with small resistance which allows large currents to pass through it. This is useful for measuring the current in a circuit: due to the Ohm’s law and voltage drop on the shunt resistor, we can know exactly which current passes through it. For example, for this resistor whose maximum current is 10A, the voltage drop at that current will be exactly 75mV (0.075V). Using a precise ADC, we can accurately measure the current of our consumer or power source.

• Max. current: 10A
• Voltage drop for max. current: 75mV
• Dimensions: 120mm x 25mm

This is a huge roll of soldering wire. It’s a copper-plated stranded wire that comes in a thickness of 30AWG. Ideal for connecting to a protoboard or inside a project box. If you decide to buy this roll, you’ve probably solved the wire problem for at least 10 years!

• Thickness: 30AWG (0.255mm cross-section)
• Lenght: 250m
• Wire color: crvena, žuta, plava, crna ili bijela
• Stranded copper-plated wire

Every real fan of electronics loves to have things that he knows will be needed in the future. The first and the most basic thing is a set of resistors, but immediately after, there are capacitors. The amount of times the whole project wouldn’t work just cause of one capacitor is too high! This set comes with a total of 120 electrolytic capacitors, with different voltages and capacities.

Panel pushbuttons may look ordinary but may look good as well, as this metal pushbutton with backlight. This pushbutton is waterproof, shock-proof and vandal-proof. Also comes with a backlight in a variety of colors.

Panel pushbuttons may look ordinary but may look good as well, as this metal pushbutton with backlight. This pushbutton is waterproof, shock-proof and vandal-proof. Also comes with a backlight in a variety of colors.