Tools & Lab equipment

Hex key for standard 2mm head.

• Material: Steel(CrV)
• For 2mm hex heads

The auxiliary arm is a practical desktop tool that allows you to hold PCBs, components, and wires when soldering or working with them. Thanks to the crocodile clips adjustable in all directions, you can attach any type of material and adjust it to an accessible position. The arm itself is heavy and will not move during work. In addition, the third arm, as it is also called, has a magnifier with LED lighting on it, so working with small components will be even easier. If that’s not enough, there is also a soldering iron holder on this auxiliary arm.

• Number of crocodile clips: 2
• LED lighting powering: 3x AAA batteries

Cutting knife is actually a sharp scalpel that you can operate very precisely. It will be very useful for cutting faulty traces on printed circuit boards, but also for any other purpose of precision cutting or marking.

• Material: steel

Classic small pliers as a basic tool of every electronic workshop. It will come in handy for bending components, cutting or just holding.

Every household, let alone a workshop, is not complete without an AC tester. This affordable tester allows you to check for AC voltage in the wires.

To pick up ultra-small components and put them in the right place you simply need to have the right tools. One such are tweezers for SMD components, which will allow you to handle even 0603 components and with a little practice, even smaller ones. Of course, tweezers are ESD safe so you don’t have to worry that something will happen to your components. This set consists of 6 tweezers with which you will be able to place all types of SMD components.

• Number of tweezers inside set: 6

This set of screwdrivers and accessories for working with electronics contains everything you will need when repairing electronics. See the full list below, the set consists of a screwdriver, tweezers, an opening tool, a cutting knife and several opening levers.

• Screwdrivers: Torx 0.8x40mm, T3x40mm, T4x40mm, T5x40mm, T6x40mm, flat 2.0x40mm, philips 1.5x40mm, philips 2.0x40mm
• Cutting knife (traces)
• 2 tweezers
• Opening levers: 2 plastic triangle shaped, 2 plastic levers, 1 metal lever

An oscilloscope is very useful to have nearby – it allows you to display signals depending on the time. Usual problem with oscilloscopes is that they are large and awkward to carry, but with this USB oscilloscope it is no longer a problem! Plug it into a USB port, install drivers and software, plug in the probes and measure. Using special software, you have controls over the device as on a classic desktop oscilloscope. It has 2 channels, measures up to 20MHz and takes 48 million samples per second. It comes with two probes.

If an analog approach to signal processing with an oscilloscope is not enough, (firmware developers, we hear you!) There is also a 16-channel logic analyzer. It will read signals from 0V to 5.5V on 16 channels simultaneously, displaying them on the timeline for easy analysis, so you can accurately measure the duration and decode each digital signal. The logic analyzer software even decodes the data being sent, if it is a standard communication. Comes with 16 quick signal connecting connectors.

Osciloscope
• Frequency range: 20MHz
• Channels: 2
• Sample rate: 48MSa/s
• Memory depth: 1M
• Rise time: 17.5ns
• Time division: 1ns/div – 5000s/div
• Voltage division: 20mV/div – 5V/div

Logic analyzer
• Channels: 16
• Input voltage range: 0V – 5.5V
• Maximum number of samples: 48M
• Frequency range: 10MHz
• Memory depth: 1M/CH

• Connection: USB
• Comes with s 2 PP80B probes
• Dimensions: 200 x 100 x 35mm
• Weight: 300g

Compressed air is most commonly used for cleaning electronics. Since the gas from the container comes out under high pressure, it is perfect for cleaning dust and all particles. It is colorless, odorless and leaves no traces. It is able to reach even the most inaccessible parts of any electronic equipment and is especially practical for cleaning places you don’t want to touch.

• Package: 300mL

Kontakt S is used to remove oxides and sulfides from electrical contacts and it protects against corrosion. This ensures a smooth flow of current through the connector, even in cases of already oxidized and worn contacts. It is especially useful in audio products, where the cleanliness of the contact is crucial.

• Package: 400mL
• Spray
• Density: 0,74g/cm3

A set of heat shrinks that insulate the connections between the wires when heated.

The set consists of:

• • 60 heat shrinks 40 mm long, 2 mm in diameter
• • 30 heat shrinks 40 mm long, 3 mm in diameter
• • 16 heat shrinks 40 mm long, 4 mm in diameter
• • 16 heat shrinks 40 mm long, 5 mm in diameter
• • 16 heat shrinks 40 mm long, 6 mm in diameter
• • 10 heat shrinks 40 mm long, 9 mm in diameter
• • 8 heat shrinks 40 mm long, 10 mm in diameter
• • 8 heat shrinks 40 mm long, 11 mm in diameter

Protoboard used for the permanent connection (also known as soldering) of electronic components. High quality, with solder mask on one side, as well as column and row markings.

• Dimensions: 7cm x 9cm

Protoboard used for the permanent connection (also known as soldering) of electronic components. High quality, with solder mask on one side, as well as column and row markings.

• Dimensions: 15cm x 9cm

Copper board used for making your own PCBs.

• Number of layers: 2
• Material: FR1
• Copper thickness: 35um
• Dimensions: 160 x 100 mm

Where do we use flux? Flux is used by soldering. It is used to clean the pcb from any dust or oxidation (if there was any), which results with quality solder connections – solder attaches more easily to the pads where we want to put solder. Besides that, it improves electrical contact. Anyone who has tried it will know!

• Amount: 40g

Warning: Close the flux can after use.

STLink standardly is known programmer for STM microcontrollers. Works with a whole specter of tools for STM, including mbed, Atollic Studio, Arduino IDE etc.

Soldermask is a layer on a printed circuit board that gives it a color, usually green, and is used to protect the tile from corrosion, easier soldering and visual appearance. This soldermask is in a liquid state, so you can easily apply it to places you want to protect further, such as wires that have been added or lines that have been damaged. It enters the solid state under UV light.

A vernier caliper is a tool that allows precise measurements of many physical dimensions. This one, made of high-strength stainless steel and with a digital display of the measured value.

ESD (ElectroStatic Discharge) or static electricity is a phenomenon where electricity flows suddenly between two electrically charged objects that are in touch or near each other. You experienced it, most likely,  when you touched something and felt “current” hurting you. Other than being unpleasant, there are no major consequences caused by ESD. But in electronics, ESD is very dangerous and can destroy your components and semiconductors.

This is where antistatic bracelet helps. If its other end is properly terminated to ground, it means that you are too. Through the 1M resistor, current flows to ground where it safely “goes” without being felt, and there won’t be any damage to components. It is always recommended to wear an anti-tatic bracelet whilte working with electronics.

Copper board used for making your own PCBs.

• Number of layers: 2
• Material: FR4
• Copper thickness: 35um
• Dimensions: 150 x 100 mm

Copper board used for making your own PCBs.

• Number of layers: 1
• Material: FR4
• Copper thickness: 35um
• Dimensions: 150 x 100 mm

Classic solder for working with a hand soldering iron. Solder paste is in the center of the solder, which simultaneously cleans the surface on which its soldering and gives a better grip of solder.

It is extremely easy to remove insulation and solder with this stranded copper wire. It will serve great in small projects and prototypes.

It is extremely easy to remove insulation and solder with this stranded copper wire. It will serve great in small projects and prototypes.